Do you want to give your lawn a neat, well-defined edge? If so, then you may have heard about using a weed eater as an edger.
You may be wondering if this is even possible, and if so, how to do it.
Well, the good news is that it is possible, and we’re here to show you how! This step-by-step guide will walk you through what size trimmer line to use, how to start the engine, how to hold and guide the trimmer, and more.
Plus, we’ll provide some useful tips and techniques to help you get the best results.
So, let’s get started!
Short Answer
To use a weed eater as an edger, start by setting the trimmer head to the lowest setting.
Then, place the trimmer head at the edge of the grass and walk backwards, guiding the machine around the edge of the grass.
Be sure to keep the spinning head at a slight angle, so that the trimmer line cuts away at the grass and soil.
When youre finished, use a rake or garden trowel to clean up the edges and remove any excess debris.
Finally, use a string trimmer to neaten the edges and create a clean, finished look.
What Size Trimmer Line Should I Use?
When using a weed eater as an edger, it is important to use the right size trimmer line.
The size of the trimmer line can vary depending on the model of your weed eater, so it is important to check the manufacturers instructions before beginning.
Generally, a thinner trimmer line will be better for edging, as it is less likely to get tangled in the grass or cause damage to your lawn.
Thinner trimmer line is also more agile and will be easier to maneuver around the edges of your lawn.
Thicker trimmer line is better for larger areas, as it can cut through thicker weeds and grass more easily.
However, it is important to be careful when using thicker trimmer line as it can cause damage to your lawn if it is used too aggressively.
Starting the Engine
Getting ready to use your weed eater as an edger is relatively easy, but the most important step is to ensure that the trimmer line is the right size and type for your particular model.
Depending on the manufacturer and model of your weed eater, it may take a specific size and type of trimmer line to get the best performance.
Once you have the right trimmer line, youre ready to get started.
With most weed eaters, the engine is started with a pull cord.
Make sure youre in an open area away from any people or animals, and hold the weed eater firmly with both hands.
Pull the cord until the engine starts, and then youre ready to begin edging.
Its important to keep your hands firmly on the weed eater during this process, as the engine can kick back and cause injury if its not held securely.
Holding and Guiding the Trimmer
When it comes to using a weed eater as an edger, the most important step is to make sure you are holding and guiding the trimmer correctly.
To do this, you should start by ensuring the trimmer line is the right size for your weed eater.
This is important to make sure that the trimmer has enough power to effectively cut through the grass and create a neat edge.
Once the trimmer line is set, start the engine and hold the trimmer with both hands.
Then, you can begin to guide it along the edge of the lawn.
It is important to keep the trimming line close to the edge for best results.
This will help you to create a neat, professional-looking edge.
To ensure accuracy, you should go slowly and make sure you are following the edge of the lawn as closely as possible.
Once you have finished, you can sweep away any excess grass clippings with a broom.
With a bit of practice, you’ll be able to create a neat, professional-looking edge in no time.
Keeping the Trimmer Line Close to the Edge
When using your weed eater as an edger, it is important to keep the trimmer line close to the edge of the lawn for the best results.
The closer you keep the line, the cleaner and more professional the edge will look.
To do this, you should hold the trimmer with both hands and guide it along the edge of the lawn.
You want to make sure that the line is just barely touching the edge of the grass and not going too deep into the soil.
This will ensure that the edge of the lawn looks neat and tidy after you are finished.
Additionally, you should move slowly and steadily while edging the lawn to ensure that the edge is even and consistent.
With a bit of practice, youll be able to create a neat, professional-looking edge in no time.
Making Multiple Passes Around the Lawn
Once you have the right trimmer line size and the engine started, you can begin to use the weed eater as an edger.
It is important to make multiple passes around the lawn, as this will ensure that the edges are neat and tidy.
Start with a shallow pass, as this will help you to get a feel for the weed eater and the trimmer line.
Make sure to keep the trimmer line close to the edge of the lawn to achieve the best results.
From there, you can make a deeper pass by angling the weed eater slightly inward.
This will help to create a crisp and clean edge.
Once you have made your passes, you should inspect your work.
If you find that there are any areas that need a little extra attention, you can go back and make a few more shallow passes to make sure that the edges are looking their best.
Remember to take your time and move slowly to ensure that you get the best results.
With practice, you’ll be able to create a neat and professional-looking edge with ease.
Finishing the Edging Job
Once you have finished edging your lawn with your weed eater, the last step is to sweep away any excess grass clippings that may have been left behind.
This is important to ensure that all the edges of your lawn look neat and tidy.
To do this, simply use a broom to sweep away any stray clippings that are left behind.
This should be done slowly with a gentle sweeping motion to ensure that all the clippings are removed.
Doing this will also help to prevent clumps of clippings from forming in the corners of your lawn.
With a bit of practice, you’ll soon be able to create a neat, professional-looking edge in no time.
Practicing Tips and Techniques
Weed eaters are an essential tool to have in your arsenal if you want to keep your lawn and garden looking neat and tidy.
A weed eater can easily be used as an edger to create a professional look around your lawn.
However, it takes a bit of practice to learn the proper techniques and get the most out of your weed eater.
When using a weed eater as an edger, start by making sure the trimmer line you are using is the right size for your weed eater.
Too large a line can cause damage to your weed eater, while too small a line will not be able to cut through the grass effectively.
Once you have the correct size line, start the engine and hold the trimmer with both hands.
It is important to be as precise as possible when using the weed eater as an edger.
Guide the trimmer along the edge of the lawn, keeping the trimming line close to the edge for the best results.
If you find yourself going off-course, simply adjust the trimming line and start again.
As you make your way around the lawn, you will be able to get a feel for the rhythm of the weed eater and you can start to work faster.
Once you have finished edging your lawn, sweep away any excess grass clippings with a broom.
This will give your lawn a neat and tidy finish.
With a bit of practice and patience, you will soon be able to create a professional-looking edge in no time.
Final Thoughts
Using a weed eater as an edger is not only a great way to create neat and tidy edges around your lawn and garden, but it can also be a lot of fun.
With the right trimmer line size, the right technique, and a bit of practice, you’ll be able to create a professional-looking edge that will make your lawn the envy of your neighbors.
So grab your weed eater, and get to work!