If you’re ready to get your hot tub out of rest mode and back to working order, you’ve come to the right place.
In this article, we’ll walk you through the steps of how to get your hot tub out of rest mode, why it’s in rest mode in the first place, and what troubleshooting techniques and parts you may need to replace.
With this guide, you’ll be able to easily get your hot tub back to its optimal working condition.
Let’s get started!
Table of Contents
Short Answer
To get a hot tub out of rest mode, you will need to reset the hot tub’s power.
This usually involves turning off the power to the hot tub for a few moments and then turning it back on.
Once the power is reset, you should be able to access the control panel and reset the hot tub out of rest mode.
Depending on the make and model of your hot tub, you may also need to reset the heater or adjust the temperature settings.
Make sure you read the instructions in your hot tub’s manual before attempting any reset.
Why Your Hot Tub is in Rest Mode
If your hot tub is stuck in rest mode, it’s important to understand why this has happened.
Generally, rest mode is a safety feature built into most modern hot tubs.
It’s designed to shut down the system if it detects a problem, such as an overheating motor or an electrical malfunction.
This helps to protect the hot tub from further damage and keeps it from becoming a potential fire hazard.
It’s also a good idea to check the temperature sensor and the pressure switch on the heater, as these can be faulty and cause the hot tub to enter rest mode.
If these parts need to be replaced, it’s best to call a professional to ensure that the job is done correctly.
Step 1
For the first step in getting your hot tub out of rest mode, its important to check the circuit breaker and make sure it is switched on.
The circuit breaker is responsible for controlling the electrical power to the hot tub and any other electrical devices associated with it.
If the circuit breaker is off, it will prevent the hot tub from operating properly.
To check the circuit breaker, locate it near the hot tub and then switch it on.
Once it is on, the hot tub should be back in operation.
If the circuit breaker is already on, then the next step is to check the GFCI breaker for any tripped circuits.
This device monitors the electrical current in the hot tub and will trip if it detects any faults.
To reset the GFCI breaker, simply switch it off and then back on again.
If this does not resolve the issue, then you may need to move on to the next step.
Step 2
Once youve checked your circuit breaker and GFCI breaker, the next step is to check the temperature sensor and the pressure switch on the heater.
The temperature sensor is responsible for controlling the temperature of the hot tub, while the pressure switch ensures that the heater is running correctly.
If either of these components are malfunctioning, your hot tub may be stuck in rest mode.
To troubleshoot, you can use a multimeter to check for any voltage irregularities.
If there is a problem, you may need to replace the faulty component.
Alternatively, you can try resetting the temperature sensor and pressure switch by disconnecting the power and performing a hard reset.
If the issue persists, youll need to contact a hot tub technician to inspect and repair the issue.
With a few simple steps, you can get your hot tub out of rest mode and back to its original working condition.
Step 3
If the circuit breaker and GFCI breaker have been checked and the hot tub is still stuck in rest mode, then its time to check the temperature sensor and pressure switch on the heater.
These components are responsible for controlling the heating and circulation of the water, so if theyre not functioning properly, the hot tub may not be able to reach its desired temperature and stay in rest mode.
To check these, first locate the temperature sensor and then use a multimeter to test it for continuity.
If its functioning properly, then turn your attention to the pressure switch.
This can be tested by using a pressure gauge to measure the pressure in the hot tub when the heater is on.
If the pressure is too low, then the pressure switch may need to be replaced.
If all else fails, its best to contact a hot tub technician to inspect and repair the issue.
With these few simple steps, you should be able to get your hot tub out of rest mode and back to its original working condition.
Step 4
The fourth and final step to getting your hot tub out of rest mode is to contact a hot tub technician to inspect and repair the issue.
This is generally the last resort, but it is always best to contact a professional if you are not confident in your own ability to diagnose and fix the underlying issue.
A technician will be able to thoroughly inspect the hot tub, diagnose any problems, and advise on the best course of action to get it back up and running.
They may also be able to suggest additional preventative maintenance measures to help keep your hot tub running for longer.
If you’re not confident in your own ability to fix the issue, contacting a hot tub technician is the best way to ensure the job is done properly.
Troubleshooting Techniques
When it comes to troubleshooting a hot tub stuck in rest mode, there are a few steps you can take to get it back up and running.
Before taking any drastic measures, it is important to check the basics first.
First, check the circuit breaker to make sure it is switched on.
If it is, then check the GFCI breaker for any tripped circuits.
If either of these are the issue, resetting them should get your hot tub back in operation.
If the problem persists, the next step is to check the temperature sensor and the pressure switch on the heater.
If either of these are faulty, you may need to replace them.
It is important to note that while the temperature sensor is fairly easy to replace yourself, the pressure switch will likely require the help of a professional.
Finally, if all else fails, contact a hot tub technician to inspect and repair the issue.
With a few simple steps, you can get your hot tub out of rest mode and back to its original working condition.
Replacing Parts
If all the above steps fail and your hot tub remains in rest mode, you may need to replace the parts that may be causing the issue.
This includes the temperature sensor and the pressure switch on the heater.
The temperature sensor is responsible for regulating the temperature of the hot tub and the pressure switch on the heater is responsible for keeping the heater working properly.
Replacing these parts is not a difficult task, but it is important to make sure you get the right parts.
You can buy replacement parts online or from your local hot tub dealer, but it is important to make sure they are compatible with your hot tub.
If you are unsure about what parts to get, contact a hot tub technician or dealer for assistance.
Once you have the right parts, the next step is to install them.
This may require some basic plumbing and electrical skills, so it is important to make sure you know what you are doing.
If you are not confident in your ability to do it yourself, it may be worth hiring a professional to do the job for you.
Once the parts are replaced, you should be able to get your hot tub out of rest mode and back to its original working condition.
However, it is important to keep in mind that replacing the parts may not solve the problem if there is an underlying issue with the hot tub.
In this case, it is best to contact a hot tub technician for further inspection and repair.
Final Thoughts
Getting your hot tub out of rest mode can be a hassle, but if you follow the steps outlined above, it should be a breeze.
Start by checking the circuit breaker and GFCI breaker and then move on to checking the temperature sensor and pressure switch.
If all else fails, you may need to replace the faulty parts or call in a hot tub technician.
With these simple steps, you should be able to get your hot tub up and running in no time.
So don’t wait any longer – take action now and get your hot tub out of rest mode!