Do you want to know how to easily get air out of inground pool lines? Owning a pool is a great way to beat the summer heat, but with that comes the responsibility of maintaining your pool.
Knowing how to remove air from your pool lines is an essential part of this.
In this article, we will cover the basics of what an inground pool is, why pool lines need air, how to open the air relief valve, what to do if air isn’t coming out, using a vacuum, and closing the air relief valve.
Read on to learn the easy steps for removing air from your pool lines.
Short Answer
To get air out of inground pool lines, start by turning off the pump and skimmer system.
Then, open the air bleeder valves on the filter and pump.
Next, attach a vacuum hose to the skimmer and turn the pump back on.
Finally, wait for the air to be completely removed from the lines and then close the air bleeder valves.
What Is an Inground Pool?
An inground pool is a swimming pool that is built into the ground, rather than being placed above it.
Inground pools are typically made of concrete or fiberglass and are often surrounded by a deck or patio area.
Inground pools provide a permanent, aesthetically pleasing addition to any yard or outdoor space.
They also provide a cool, refreshing way to escape the heat of summer days.
While having an inground pool can be quite enjoyable, air getting stuck in the pool lines can be a major headache.
Fortunately, there are some easy steps you can take to get rid of the air and get your pool functioning again.
Why Do Pool Lines Need Air?
Having an inground pool can be a great way to cool off during the hot summer months, but it can be a headache when air gets trapped in the pool lines.
Air in the pool lines can cause a number of issues, such as low water pressure and inefficient filtration.
It is important to get the air out of the pool lines to ensure the pool is running efficiently and safely.
The most common cause of air in the pool lines is when the pool pump turns off and the water in the line is exposed to the air.
This is because as the pump turns off, the water in the line is pulled back into the pool, leaving a vacuum that draws air into the line.
This air can then be trapped in the line and cause a number of issues.
In order to get the air out of the pool lines, the first step is to locate the air relief valve.
This is typically located near the skimmer, and is designed to release any air that is trapped in the line.
Once you have located the air relief valve, it is important to open it and allow the air to escape.
This can be done manually or with the help of a vacuum.
If the air is not coming out, you may need to use a vacuum to suck the air out.
This is done by connecting the vacuum to the air relief valve and then turning it on.
Once the air is gone, close the valve and you should be good to go.
Getting the air out of the pool lines is an important step in maintaining the efficiency of your pool.
By following the steps outlined above, you can ensure that your pool is running at its best and you can enjoy it all summer long.
Identifying the Air Relief Valve
Identifying the air relief valve is an important first step in getting the air out of your inground pool lines.
This valve is typically located near the skimmer, and is usually a large, round valve with a handle.
It is important to note that the air relief valve may not be visible at first, as it may be hidden behind the skimmer basket or other pool equipment.
To find the air relief valve, you should start by looking around the skimmer.
If you cannot see the valve, you may need to move the skimmer basket and other equipment to get a better view.
Once you have located the valve, you can open it and allow the air to escape.
This is usually easy to do with a simple twist of the handle.
If the air is not coming out of the valve, you may need to use a vacuum to suck the air out.
This is a more involved process and should be done with caution.
If you are uncomfortable with this process, you may want to consider hiring a professional to help.
How to Open the Air Relief Valve
Opening the air relief valve is the first step in getting air out of an inground pools lines.
This valve is typically located near the skimmer, so youll want to start your search there.
If youre having trouble finding it, consult your owners manual or contact a pool professional for help.
Once you have located the valve, youll want to open it.
Depending on the type of valve you have, this could involve unscrewing a cap or turning a knob.
Make sure to open it fully and allow the air to escape.
If youre having trouble getting the air to come out, you may need to use a vacuum to help suck it out.
You can rent or buy a vacuum designed specifically for this purpose, or you can use a shop vacuum if you have one on hand.
When the air has been released, make sure to close the valve securely.
This will ensure that no more air gets into the pool lines.
Once the valve is closed, you should be all set and ready to enjoy your inground pool.
What to Do If the Air Is Not Coming Out
When air gets stuck in your inground pool lines, it can be a major inconvenience.
Fortunately, there are a few easy steps you can take to get the air out.
The first step is to locate the air relief valve.
This valve is usually located near the skimmer and should be easy to find.
Once you have located it, open the valve and allow the air to escape.
If the air is not coming out, you may need to use a vacuum to suck the air out.
This can be done with a standard shop vac or a special vacuum designed for pool lines.
To use a shop vac, attach the vacuum hose to the air relief valve and turn it on.
Allow the vacuum to run for a few minutes, and you should see the air start to escape.
When the air is gone, turn off the vacuum and close the valve.
In some cases, the air relief valve may be clogged.
If this is the case, you may need to use a pipe cleaner or other tool to clean out the valve before it will work properly.
You can also try using a wet/dry vac to help get the air out, as this type of vacuum is more powerful than a standard shop vac.
No matter how you go about getting the air out of your inground pool lines, the important thing is to make sure the air is gone before closing the valve.
If the air is still present, the pool may not be able to circulate properly, resulting in poor water quality and other problems.
By following these steps, you can easily get the air out of your inground pool lines and enjoy a clean and refreshing pool all summer long.
The Use of a Vacuum
Using a vacuum to get air out of your inground pool lines is a great solution if the air relief valve isn’t working.
A vacuum can be used to suck the air out, allowing the air to escape and the pool lines to function properly once again.
It’s important to note that using a vacuum does require some skill and can be dangerous if done incorrectly.
If you’re unfamiliar with using a vacuum, it’s best to hire a professional to do the job for you.
When using a vacuum, you’ll need to have the appropriate equipment.
This includes a vacuum head, a vacuum hose, and a pool pump.
The vacuum head should be attached to the end of the vacuum hose, and the hose should be connected to the pool pump.
Once everything is set up, turn on the pool pump and start the vacuum.
The vacuum will suck the air out of the pool lines, allowing the air to escape and the pool lines to function properly.
Once the air is gone, you can turn off the vacuum and the pool pump and close the air relief valve.
In conclusion, getting air out of your inground pool lines can be tricky, but it doesn’t have to be.
By locating the air relief valve and opening it, you can allow the air to escape without having to use a vacuum.
If the air relief valve isn’t working, you can use a vacuum to get the air out, but it’s best to hire a professional if you’re unfamiliar with using a vacuum.
With the right knowledge and equipment, you can get your pool lines functioning properly in no time.
Closing the Air Relief Valve
Closing the air relief valve is an important step in getting air out of inground pool lines.
The air relief valve is typically located near the skimmer and can be identified by its round shape.
To close the valve, first make sure that all the air has been released by either using a vacuum or allowing it to naturally escape through the valve.
Once the air is gone, make sure that the valve is tightly closed by turning the handle in a clockwise direction until it is securely in place.
If the valve is not tightly closed, air may re-enter the pool lines and cause further difficulties.
Be sure to check the valve regularly to ensure that it is properly closed and that no air is entering the pool lines.
Final Thoughts
Having an inground pool is a great way to enjoy the summer months, but air in the pool lines can be a real hassle.
With these easy steps, you’ll be able to quickly identify the air relief valve, open it, and get the air out of your pool lines.
If the air isn’t coming out, a vacuum may be necessary.
Once the air is gone, make sure to close the valve and enjoy your pool in peace.
So, what are you waiting for? Get out there and follow these steps to get the air out of your inground pool lines!