Have you ever had a door in your home that just won’t stay on track? Many homeowners experience this issue, but it can be easily fixed with the right tools and knowledge.
In this article, we’ll discuss how to put a door back on track in just a few easy steps.
We’ll cover the materials and tools you’ll need, how to remove the door from its hinges, checking the track, making repairs, lubricating the track and rollers, and tips for easier re-installation.
So, read on to learn all about how to put a door back on track!
Table of Contents
Short Answer
To put a door back on track, start by unscrewing the door hinges from the door frame.
Then, check the track for any obstructions or debris and clear them away.
Next, reattach the door hinges to the door frame and use a level to make sure they are even.
Finally, check to make sure the door is opening and closing smoothly.
Tools and Materials Needed
When attempting to put a door back on track, it’s important to have the right tools and materials on hand.
At the very least, you’ll need a screwdriver, adjustable wrench, and some lubricant.
Depending on the type of door and track you’re working with, you may also need a hammer and nails, a hacksaw, or a drill.
If you’re not sure what tools you’ll need, it’s always a good idea to consult a professional.
Additionally, you’ll need some replacement parts, such as hinges and rollers.
These can be purchased at any hardware store, and they come in a variety of sizes and styles to fit any door and track.
Once you have the necessary tools and materials, you can begin the process of putting your door back on track.
Removing the Door from its Hinges
Removing a door from its hinges is a key step in getting it back on track.
It is important to make sure you have the right tools for the job before you begin, such as a screwdriver, wrench, and hammer.
Begin by loosening the screws that hold the hinges in place.
Once the screws are loose, you can carefully pull the door away from the frame.
Be sure to support the door as you do this, as it can be heavy and awkward.
If you are having difficulty, you may need to use a pry bar to help loosen the hinges.
Once the door is free, set it aside and prepare for the next step.
Checking the Track
Checking the track is an essential step in putting a door back on track.
Before removing the door from its hinges, it is important to inspect the track for any obstructions or damage.
This can help to ensure that the door slides smoothly back on the track after it is re-hung.
If you find any obstructions, it is important to remove them before proceeding.
Additionally, if the track has been damaged in any way, it should be repaired before the door is re-hung.
If the track is not functioning properly, it can cause the door to become stuck or misaligned, making it difficult to open and close.
It is also important to check the rollers on the door to make sure they are working properly.
If they are not, they should be replaced or repaired before the door is re-hung.
Making Necessary Repairs
Making necessary repairs is an important part of getting your door back on track.
After you’ve removed the door from its hinges, take a minute to inspect the track for any obstructions or damage that could be preventing the door from rolling smoothly.
If you find any obstructions, like dirt or debris, remove them.
If you notice any dents or bends in the track, you may need to straighten them out with a hammer and pliers.
If the tracks are severely damaged, you may need to replace them with new ones.
Additionally, check the rollers to make sure they are in good condition and free of any dirt or debris.
If they are damaged, you’ll need to replace them as well.
Taking the time to make any necessary repairs will ensure that your door will be able to move along the track smoothly without any issues.
Lubricating the Track and Rollers
Once you have checked the tracks and rollers for any obstructions and made any necessary repairs, its time to lubricate them.
This is an important step in getting the door back on track, as it will help the door open and close more smoothly.
To lubricate the track and rollers, you can use a silicone-based lubricant, such as WD-40.
Start by spraying a small amount of lubricant onto the track, then use a clean cloth to wipe away any excess.
Next, spray a small amount of lubricant onto the rollers, and use a cloth to wipe away any excess.
This will help ensure that the door slides easily and smoothly along the track.
Finally, use a damp cloth to clean the track and rollers to remove any lubricant residue.
With the tracks and rollers properly lubricated, your door should be back on track in no time!
Re-Hanging the Door
Re-hanging the door is the final step in putting it back on track.
This can be a tricky process and requires a bit of patience and precision.
To begin, make sure that the hinges are properly aligned with the door frame and door jamb.
Use a measuring tape or level to make sure that everything is even.
After that, use a screwdriver or drill to tighten the screws that hold the hinges in place.
Next, place the door back onto its hinges.
Make sure that the door is completely flush with the frame and jamb before tightening the screws.
Be sure to double-check that the door is equally spaced on both sides of the frame and jamb.
Once the door is completely flush and even, use a screwdriver or drill to tighten the screws that hold the hinges in place.
Finally, make sure that the door opens and closes smoothly.
If not, check the track and rollers for any obstructions or other issues.
Make any necessary repairs and lubricate the track and rollers, if needed.
Once everything is in order, you should have your door back on track in no time.
Tips for Easier Re-Installation
Once youve successfully removed the door from its hinges, there are several steps you can take to make the re-installation process easier.
First, make sure to check the track for any obstructions or debris that may be preventing the door from sliding back in place.
If there is, youll need to remove it before proceeding.
Next, be sure to lubricate the track with a silicone-based lubricant.
This will help the door to slide more easily and reduce friction.
Finally, before re-installing the door, make sure to check the rollers and ensure they are properly aligned.
If they are not, you may need to adjust them to ensure a smooth re-installation.
Once youve taken all of these steps, youre ready to re-hang the door.
With the right tools and instructions, you can have your door back on track in no time.
Final Thoughts
By following the easy steps outlined above, you can quickly and easily put your door back on track.
With the right tools and materials, you can remove the door from its hinges, check the track, make any necessary repairs, lubricate the track and rollers, and re-hang the door.
With these steps, you’ll have your door back on track in no time.
So why wait? Get started now and put your door back on track!