Are you looking to relax in your own backyard oasis? Have you been dreaming of having your own wood-fired hot tub? If the answer is yes, then youve come to the right place! This step-by-step guide will walk you through everything you need to know about building a wood-fired hot tub, from the materials and tools youll need, to connecting the wood-burning heater and water pump, and even filling the tub.
Well also provide some safety considerations to keep in mind.
So, lets get started on your journey to creating the ultimate backyard retreat for you and your family!
Table of Contents
Short Answer
Making a wood fired hot tub requires several steps.
First, build a fire pit and line it with fire bricks.
Then, install a stainless steel fire ring in the fire pit.
Next, build a wooden frame around the fire pit.
After that, use a tarp to line the inside of the frame and secure it with nails.
Finally, fill the tub with water and let it heat up with the fire.
Materials and Tools Needed
Making a wood fired hot tub is no small feat, but with the right materials and tools, it can be done! To make your own wood fired hot tub, you will need a round wooden tub, a wood-burning heater, a water pump, and water lines.
In addition, you will need a few tools to complete the project, such as a saw, drill, screws, and nails.
To ensure the hot tub is sturdy, use high-quality materials such as cedar or pressure-treated lumber.
You may also want to use a waterproof sealant to protect the wood from moisture.
Finally, you may want to have some extra wood on hand to make repairs or to replace sections of the tub if needed.
With these materials and tools, you will have everything you need to make a wood fired hot tub.
Building the Wooden Tub
Building the wooden tub is the first step in creating a wood-fired hot tub.
Depending on the type of wood you use, the process can be quite simple.
Youll need a round wooden tub with a diameter of at least 4 feet and a depth of at least 12 inches.
The size of the tub will depend on how many people you plan on using it for.
If you plan on having multiple people in the tub at once, youll want to opt for a larger tub.
Once youve acquired the wooden tub, youll need to cut out the bottom of the tub to create a flat surface for the wood-burning heater.
You may want to use a jigsaw or circular saw for this step.
After the bottom of the tub has been cut, youll need to drill several holes in the sides of the tub to create air vents.
This will allow air to circulate throughout the tub, helping to keep it hot.
Once the bottom and sides of the tub have been cut and drilled, youll need to seal the tub to prevent water from seeping out.
You can use a waterproof sealant or paint to do this.
Once the tub is completely sealed, you can move on to the next step of the process.
Connecting the Wood-Burning Heater to the Water Pump
Connecting the wood-burning heater to the water pump is an important step in making a wood fired hot tub.
The connection will provide the necessary heat to heat the water for your hot tub.
For this step, you’ll need a round wooden tub, a wood-burning heater, a water pump, and water lines.
First, you’ll need to build the tub and connect the wood-burning heater to the water pump.
The best way to do this is to make sure the water pump is securely attached to the inside of the tub and the heater is mounted on the outside.
Make sure the heater is placed at the highest point on the outside of the tub so that the heat will be distributed evenly throughout the water.
After the heater is securely mounted, you’ll need to connect it to the water pump.
To do this, you’ll need to run a line from the heater to the pump.
Make sure the line is securely connected to both the heater and the pump.
To make sure the connection is secure, use a clamp to hold the line in place.
Once the line is securely in place, you’ll need to attach the water lines to the heater and the pump.
For this step, you’ll need to connect the water lines to the inlet and outlet of the heater and the pump.
Make sure the lines are securely attached to both the heater and the pump.
Also, make sure the lines are made of a durable material that can withstand the heat of the wood-burning heater.
Once the water lines are connected to the heater and the pump, you can move on to the next step.
Attaching the Water Lines
Attaching the water lines to a wood fired hot tub is a critical step in the process of building your own tub.
The water lines will provide a continuous flow of water to the heater, which in turn will heat the water in the tub.
To get started, you will need a few supplies including a water pump, copper piping, fittings, and a few tools.
Begin by connecting the copper piping to the heater and the pump.
It is important to make sure that the piping is properly secured to both the heater and the pump.
Use a pipe wrench to tighten the fittings to ensure that they are secure.
When connecting the piping, make sure that they are properly aligned and sealed.
This will help to prevent any water leakage.
Next, attach the water pump to the water lines.
To do this, you will need to connect the pump to the copper piping.
Make sure to secure the fittings tightly and ensure that the pump is properly aligned.
This will ensure that the pump can efficiently move the water from the heater to the tub.
Finally, attach the water lines to the tub.
You will need to make sure that the fittings are properly secured and that the lines are properly aligned.
This will ensure that the water flows freely from the pump to the tub.
Attaching the water lines to the wood fired hot tub is an important step in the process of building your own tub.
With a few simple tools and supplies, you can have your wood fired hot tub up and running in no time.
Be sure to be patient and take your time when attaching the water lines to ensure that everything is properly connected.
Once everything is connected, you will be able to enjoy your wood fired hot tub for years to come!
Filling the Tub
Filling the tub is the final step in making a wood fired hot tub, and it’s important to take your time and do it right.
You’ll want to make sure that the tub is completely full before you start the fire, as this will ensure that the tub is heated evenly.
To fill the tub, you’ll need a hose, a bucket, or a pump to move the water from one source to the tub.
Make sure that the water you are using is safe for soaking in, and if you are not sure, you can always test it with a pool testing kit to make sure it is safe.
Once the tub is full, you’ll need to attach the water lines to the heater and the pump, and then you can start the fire.
This will heat up the water in the tub, and you can enjoy a relaxing soak in your wood fired hot tub.
Starting the Fire
When it comes to start the fire in your wood fired hot tub, it is important to understand the basics of fire safety.
First and foremost, make sure you are working in a safe and well-ventilated area.
You should also have a fire extinguisher handy in case of an emergency.
Additionally, its important to choose the right firewood for your wood fired hot tub.
Avoid using softwoods such as pine or cedar as they produce too much smoke and can create a sooty build-up in your hot tub.
Hardwoods such as oak, hickory, and cherry are the best choice for your fire because they burn longer and hotter.
Now that you have the right kind of wood, you can start building your fire.
Ensure that you have a fire starter of some kind, such as a fire starter cube or a piece of newspaper.
Place the fire starter at the center of your wood pile and light it.
The fire should catch quickly and begin to spread through the wood pile.
Once your fire is burning, you will need to adjust the air supply to your wood burning stove.
To do this, adjust the air dampers to control the flow of air to the fire.
You will want to keep the dampers open wide enough to allow enough oxygen to feed the fire, but not too wide that the fire becomes too hot.
Finally, you will need to monitor the fire as it burns.
Keep an eye on the temperature of the fire and adjust the air dampers accordingly.
Additionally, check the water level in the hot tub regularly and add more water if necessary.
Once the water reaches the desired temperature, you can turn the fire off and enjoy a relaxing soak in your wood fired hot tub.
Safety Considerations
Safety should be the top priority when building a wood fired hot tub.
There are a few key considerations to keep in mind when constructing your hot tub.
First, it is important to ensure that the wood-burning heater is installed properly and meets all safety standards.
It is also critical to make sure that the water lines are properly secured and do not leak.
Additionally, it is important to ensure that the hot tub is placed on a level surface, away from any flammable materials, and is at least 10 feet away from any combustible materials.
Finally, it is important to never leave an unattended fire burning in the hot tub and to always use caution when lighting and maintaining the fire.
By following these safety considerations, you can ensure your wood fired hot tub is a safe and enjoyable experience.
Final Thoughts
Making a wood fired hot tub is both fun and rewarding.
With the right materials and tools, you can easily build a wood fired hot tub that is both eco-friendly and provides a relaxing soak.
Now that you know the steps involved and the safety considerations, you’re ready to get started.
So grab your supplies, put on your safety gear, and get ready to enjoy a hot soak in your own wood fired hot tub.