How to Get Wrinkles Out of Inground Pool Liner? Here’s How You Do It


Having an inground pool is a great way to enjoy the summer months, but it can also be a lot of work.

One of the most important maintenance tasks is keeping your pool liner wrinkle-free.

Wrinkles can be unsightly, but more importantly, they can cause structural damage to your pool.

In this article, we will discuss how to get wrinkles out of inground pool liner and provide tips for keeping your pool liner wrinkle-free.

We will also explore different types of inground pool liners and common causes of pool liner wrinkles.

So if you’re looking for ways to keep your inground pool looking its best, read on!

Short Answer

Wrinkles in an inground pool liner can be removed by draining the pool and then replacing the liner.

Before replacing the liner, ensure that the frame is even and the walls are straight.

Then start at the shallow end of the pool and work your way down, carefully smoothing out the liner as you go.

Once the liner is completely in place, fill the pool with water and use a pool brush to smooth out any remaining wrinkles.

The Importance of Keeping a Pool Liner Wrinkle-Free

Keeping a pool liner wrinkle-free is essential for both aesthetic and safety reasons.

A wrinkled pool liner can make a pool look unappealing and rundown, while also posing safety risks to swimmers.

Wrinkles can impede the smooth flow of water, creating areas of turbulence that can increase the risk of drowning.

Uneven water levels can also cause wrinkles to form, creating areas of increased water pressure that can weaken the liner and create weak spots.

Keeping a pool liner wrinkle-free is therefore essential for both aesthetic and safety reasons.

Adjusting the Water Level in the Pool

Adjusting the water level in your inground pool is one of the most important steps to take when keeping your pool liner wrinkle-free.

If the water level is too low, it can cause wrinkles to form in the liner.

This can occur for a few reasons, such as if the pool pump isn’t running properly, or if there is a leak in the pool.

To make sure that the water level is correct, you should measure the water level with a pool skimmer.

Generally, the water level should be halfway up the skimmer’s opening.

If the water is too low, you may need to add more water to the pool.

You can do this by using a garden hose and filling the pool until the desired water level is reached.

By making sure that the water level is correct, you can help to prevent wrinkles from forming in the pool liner.

Check for Sharp Objects that May Have Punctured the Liner

When it comes to keeping your inground pool liner wrinkle-free, it is essential to check for any sharp objects that may have punctured the liner.

Sharp objects such as rocks, twigs, and sticks can easily puncture the liner, especially if it isn’t well-protected.

If you have a liner that isn’t protected by a cover, it is especially important to check for sharp objects on a regular basis.

When checking for sharp objects, use a pair of gloves to protect your hands and arms, and use a flashlight to get a better view of the liner surface.

If you find any sharp objects, such as rocks, twigs, or sticks, remove them and replace them with smooth stones or sand.

If you find any tears in the liner, it is best to repair them right away to avoid further damage and wrinkles.

It is also important to keep in mind that any tears in the liner will cause wrinkles to form.

If you find any tears in the liner, it is best to repair them right away with a vinyl repair kit, which can be purchased at most pool supply stores.

This will help to ensure that the liner remains wrinkle-free and smooth.

Finally, it is also important to check for any sharp objects in the pool itself, such as rocks and sticks, as these can easily puncture the liner if they come into contact with it.

If you find any sharp objects in the pool, remove them and replace them with smooth stones or sand to ensure that the liner remains wrinkle-free and safe for swimming.

By following these simple steps, you can ensure that your inground pool liner remains wrinkle-free and safe for swimming.

By regularly checking for sharp objects that may have punctured the liner, you can help to prevent wrinkles from forming, and keep your inground pool looking its best.

Using a Pool Vacuum to Smooth Out Wrinkles

Using a pool vacuum is often one of the most effective ways to get wrinkles out of an inground pool liner.

A pool vacuum can help to gently run over the wrinkles and smooth them out.

The pool vacuum should be used on the lowest setting to prevent any potential damage to the liner.

It is also important to ensure that the vacuum is moving slowly over the wrinkles, as moving too quickly can cause them to become worse.

Additionally, the vacuum should be moved in a circular motion to ensure that all wrinkles are dealt with.

The vacuum should be moved in the same direction until all the wrinkles have been smoothed out.

After the vacuum is finished, the water level should be examined to make sure that it is at the proper height.

If the water level is too low, wrinkles may form again.

Other Ways to Keep an Inground Pool Liner Wrinkle-Free

In addition to the steps mentioned above, there are a few other tips and tricks you can use to keep your inground pool liner wrinkle-free.

For instance, if your pool liner is made from a vinyl material, you should avoid using any type of abrasive cleaners on it, as this can contribute to wrinkles.

Furthermore, make sure to check the water chemistry of your pool on a regular basis and adjust it as needed, as too much chlorine or pH imbalance can cause the vinyl to become brittle and form wrinkles.

Another way to keep your inground pool liner wrinkle-free is to ensure that all of the pool components, such as the skimmer, return jets, and drain, are all properly installed and functioning correctly.

Loose components can cause the liner to stretch and cause wrinkles.

You should also inspect your pool liner for any signs of shrinkage, as this can cause wrinkles to form as well.

Finally, if your pool liner is old or damaged, consider replacing it with a new one, as this will help to extend the life of your pool and keep it looking great for many years to come.

A professional installer can help you with this process and ensure that your new liner is properly installed and wrinkle-free.

Following these simple steps can help you keep your inground pool liner wrinkle-free and looking great.

With proper maintenance and regular inspection, you can enjoy a beautiful, smooth, and wrinkle-free pool liner for years to come.

Different Types of Inground Pool Liners

When it comes to inground pool liners, there are several types to choose from.

Vinyl liners are the most popular and cost-effective option, as they are easy to install and require minimal maintenance.

They are available in a variety of colors and thicknesses, and are generally resistant to cracking and fading.

Fiberglass pool liners are another option, which provide a more durable and longer-lasting option than vinyl.

They are also less prone to damage from chlorine and other chemicals.

For a more natural look, you can opt for a gunite pool liner, which is made from a mixture of concrete and sand and is extremely resilient.

Finally, you can also choose a rubber pool liner, which is made from a flexible material that is resistant to damage and can be easily patched if needed.

Common Causes of Pool Liner Wrinkles

One of the most common causes of wrinkles in an inground pool liner is low water levels.

When the water level is too low, the liner can pull away from the walls of the pool, causing wrinkles to form in the material.

Poor installation of the liner can also contribute to the problem, as an improperly fitted liner can cause the material to stretch or pull away from the walls, resulting in wrinkles.

Additionally, sharp objects in the pool can puncture the liner, creating tears that can cause wrinkles.

Finally, improper vacuuming of the pool can lead to wrinkles, as vacuuming with too much force can stretch out the liner.

Final Thoughts

By following the simple steps outlined in this article, you can ensure that your inground pool liner remains wrinkle-free and looks great.

It’s important to keep your pool liner wrinkle-free to maintain the aesthetic of your pool, as well as its safety for swimming.

Make sure to adjust the water level in the pool, check for any sharp objects that may have punctured the liner, and use a pool vacuum to gently run over the wrinkles.

Taking these steps will help to keep your pool liner looking smooth and wrinkle-free.

James Lopez

James Lopez is a lifestyle journalist. In addition to working as a journalist, he also takes courses in landscape design. He is pretty focused on the outdoor space, especially the backyard.

Recent Posts