How to Get Water Off Inground Pool Cover? (A Step-by-Step Guide)


Having a pool is a great way to cool off during the summer months.

However, having an inground pool can be a lot of work.

One of the most difficult tasks is getting water off of your pool cover.

Not only is it time-consuming but it can also be a safety hazard if left unchecked.

In this article, we will be providing you with a step-by-step guide on how to get water off of your inground pool cover.

We will also be discussing the benefits of using a pool cover, the necessary tools for removing water from your pool cover, and how to use a pool cover pump, a pool skimmer, a leaf rake, and a telescopic pole to remove any water or debris.

So, if you’re looking for an easy way to get the water off your inground pool cover, read on!

Short Answer

The first step to getting water off an inground pool cover is to make sure it is sitting evenly on the pool, with no dips or low spots.

Then, use a pool cover pump to pump the water off the cover into the pool or onto the ground.

You can also use a wet/dry vacuum to suction the water off the cover.

If the cover is too heavy with water, it can be helpful to use a pool cover roller to help lift the cover up and release the water.

Benefits of Using a Pool Cover

Having a pool cover on an inground pool can bring with it many benefits.

Not only does it help keep the pool clean and safe when it is not in use, but it also can help reduce evaporation, which can save money on water bills.

Additionally, it can help reduce the amount of sunlight that reaches the pool, which can prevent algae growth and reduce the need for chemical treatments.

A pool cover can also help keep leaves and debris out of the pool, providing an extra layer of protection against dirt and other particles.

In short, a pool cover can be a great way to keep your pool clean and safe, while also saving money on water bills and reducing the need for chemical treatments.

The Necessary Tools for Removing Water from a Pool Cover

When it comes to removing water from an inground pool cover, the right tools are essential.

To quickly and easily remove excess water, a pool cover pump is the most effective tool.

These pumps are designed specifically for this purpose and draw water up through the pool cover and out of the pool.

Pool skimmers can also be used to scoop up large debris and a leaf rake can be used to remove smaller debris.

For hard-to-reach areas, a telescopic pole might be necessary to get the job done.

Pool cover pumps are designed to be placed on top of the cover and connected to a garden hose.

The pump will then draw up the water, pump it out of the pool, and filter it through the filter.

This type of pump is usually battery operated and can be used for up to 8 hours on a single charge.

It can pump water up to 4 inches deep and can move up to 500 gallons per hour.

Pool skimmers are also great for removing large debris from a pool cover.

They are designed to be placed on top of the cover and the skimmer will then lift up any large debris, such as leaves and twigs.

The skimmer then passes the debris through a filter, which catches any small pieces.

This type of skimmer can also be used to remove small debris, such as dirt and sand.

Leaf rakes can also be used to remove small debris from an inground pool cover.

These rakes are designed with long handles that allow you to reach all areas of the pool.

The rake will then scoop up the small debris and pass it through a filter, which captures any small pieces.

Finally, a telescopic pole can be used to reach those hard-to-reach areas of the pool cover.

Telescopic poles come with extendable handles and can be used to reach all areas of the pool cover.

They are ideal for cleaning those hard-to-reach areas and can also be used to remove debris from the pool cover.

With the right tools, removing water from an inground pool cover can be a quick and easy task.

Whether you choose to use a pool cover pump, a pool skimmer, a leaf rake, or a telescopic pole, you can easily and quickly remove excess water from your inground pool cover.

Step-by-Step Guide to Removing Water from a Pool Cover

Getting water off an inground pool cover is a simple task if you have the right tools. With a combination of a pool cover pump, a pool skimmer, a leaf rake, and a telescopic pole, you can quickly and easily remove excess water from your pool cover. Here is a step-by-step guide for removing water from your pool cover:

1. Start by using the pool cover pump to remove the majority of the water from the cover. Pool cover pumps are specifically designed for this purpose and can quickly and easily remove water from the cover.

2. Use a pool skimmer to scoop up any large debris that may be present on the cover. A skimmer is a great tool for removing larger items such as leaves, sticks, and rocks.

3. Use a leaf rake to remove any smaller debris that may be present on the cover. A leaf rake is designed to pick up small debris such as twigs and leaves.

4. Use a telescopic pole to reach any hard-to-reach areas of the pool cover. Telescopic poles are great for reaching into tight spaces and can help you get to areas that may have been missed by the pool cover pump, skimmer, and leaf rake.

5. Once all the water and debris have been removed, you can then take off the pool cover and store it in a safe, dry place until you need to use it again.

With the right tools, removing water from an inground pool cover can be a quick and easy task.

No matter what type of pool cover you have, having the right tools on hand will make the job easier and help you keep your pool clean and safe.

Using a Pool Cover Pump to Remove Water

A pool cover pump is an essential tool for removing water from an inground pool cover.

It is specifically designed to quickly and efficiently remove excess water, making it the perfect choice for getting water off your cover.

The pump works by drawing water up from the cover and then out through a hose, which can be connected to a drain or other water-releasing point.

It is important to note that many pool cover pumps can also be used to remove standing water from the pool itself.

When using a pool cover pump, it is important to ensure that the pump is securely placed on the cover.

This can be done by placing it on a solid and level surface, such as a concrete slab or a pool deck.

It is also important to make sure that the pump is firmly attached to the cover, as loose pumps can be easily blown away by the wind.

Once the pump is in place, simply plug it in and turn it on.

The pump will then begin to draw water out of the cover and into the hose.

Once all the water has been removed, the pump can be switched off and unplugged.

It is worth noting that some pool cover pumps can be used in conjunction with a pool skimmer to more efficiently remove debris from the cover.

The skimmer can be used to scoop up large debris, while the pump can be used to draw away the smaller pieces.

This is a great way to quickly and efficiently remove water and debris from the cover, without having to do any manual labor.

Using a pool cover pump is an easy and effective way to remove excess water from an inground pool cover.

With the right tools and a bit of patience, you can quickly and easily get your cover looking like new.

Using a Pool Skimmer to Remove Large Debris

Using a pool skimmer is an ideal way to remove large debris from your inground pool cover.

Skimmers are designed to scoop up anything from leaves, twigs, and other debris that has collected on the surface of the pool cover.

They come with a long handle and a wide net that can reach into the corners of the pool cover and easily remove debris without having to get in the water.

When using a pool skimmer, it is important to be careful not to puncture the pool cover.

The skimmer should be held at an angle to avoid puncturing the material with its sharp edges.

After the debris has been removed, the pool skimmer should be emptied and the net should be wiped down to prevent dirt and debris from entering the pool.

Using a Leaf Rake for Smaller Debris

Removing smaller debris from an inground pool cover can be a tricky task, but it doesnt have to be.

A leaf rake is an essential tool for getting rid of small debris and leaves on an inground pool cover.

Leaf rakes are lightweight and easy to use and can be used to quickly and effectively remove smaller items from the cover.

The wide head of the rake allows for a large surface area to be covered at once, which makes the process even more efficient.

The rake also has a variety of tines, which are designed to easily pick up debris without damaging the pool cover.

To use the leaf rake, simply drag it across the inground pool cover.

The tines will grab onto any debris, leaves, or small items and lift them up for easy removal.

Once all of the debris has been removed, you can give the cover a good shake to get rid of any excess debris.

With the right tools, getting water off an inground pool cover can be a breeze.

Using a Telescopic Pole for Hard-to-Reach Areas

Using a telescopic pole is a great way to get water off an inground pool cover in hard-to-reach areas.

Telescopic poles come in different lengths and sizes, making them suitable for a variety of pool shapes and sizes.

They are made from durable materials that are strong enough to handle the weight of the water and debris that may be on the pool cover.

Telescopic poles are easy to use and can extend up to 10 feet, providing plenty of reach for even the biggest inground pools.

When using a telescopic pole, its important to be careful not to damage the pool cover.

Make sure to use a gentle sweeping motion when using the telescopic pole, as pushing too hard could damage the cover.

Additionally, telescopic poles come with a variety of attachments that can be used to remove debris from the pool cover, such as brushes and skimmers.

These attachments make it easy to reach hard-to-reach areas and make sure that all water and debris is removed from the cover.

Final Thoughts

By following the steps outlined in this guide and using the right tools, you can easily and quickly remove water and debris from your inground pool cover.

A pool cover can help keep your pool clean and safe when it’s not in use, so take the time to give your pool cover the care it needs and invest in the necessary tools.

With the right tools, you can get the water off your pool cover with ease and keep your pool clean and safe.

James Lopez

James Lopez is a lifestyle journalist. In addition to working as a journalist, he also takes courses in landscape design. He is pretty focused on the outdoor space, especially the backyard.

Recent Posts