A beautiful inground pool can be a great addition to any backyard, but keeping it looking its best can be a challenge.
One of the most common problems is when the liner comes out of track, creating wrinkles, bumps, and other imperfections.
Don’t worry – this problem can be fixed with a few simple steps.
In this guide, we’ll show you exactly how to get your inground pool liner back in track, from preparing the pool to securing the liner with the track system.
With this step-by-step guide, you’ll be able to quickly and easily get your pool liner back in track and looking its best.
So let’s get started!
Short Answer
The first step to getting an inground pool liner back in track is to remove any dirt and debris from the pool floor.
Then, you’ll need to ensure that the liner is securely attached to the coping strips and the walls of the pool.
After that, use a pool vacuum to ensure that the floor is even and free of any bumps or irregularities.
Finally, place the liner back in the pool, making sure to smooth out any wrinkles or folds along the way.
What Causes an Inground Pool Liner to Come Out of Track?
When it comes to keeping an inground pool liner in place, there are several factors that can contribute to it coming out of track.
One of the most common causes of a liner coming out of track is due to improper installation.
If the liner is not installed correctly, it can move around or become loose over time.
Additionally, the pools track system can also wear out over time, leading to the liner coming out of track.
Water pressure can also be a factor, as too much pressure can lead to the liner coming out of track.
Finally, if the pool is not regularly maintained, dirt and debris can accumulate on the pool floor, leading to the liner becoming loose and eventually coming out of track.
Preparing to Put the Liner Back in Track
Before attempting to put the inground pool liner back in track, it is important to prepare properly.
This means ensuring that any debris or dirt has been cleared away from the pool floor and that the surface is level.
It is also important to fill the pool with water before attempting to put the liner back in track.
This can be done with a garden hose, and it is important to make sure the liner is evenly distributed.
Once the pool is filled with water, it is time to use a pool vacuum to suck the liner back into place and secure it with the pool’s track system.
Clearing Debris from the Pool Floor
Maintaining a neat and tidy pool area is important for a variety of reasons.
Not only does it keep the pool looking nice, but it also helps to ensure that the pool liner is kept in place.
The first step in getting an inground pool liner back in track is to clear any debris and dirt from the pool floor.
This can be done by using a pool skimmer or vacuum to remove any leaves, twigs, and other debris that may have accumulated in the pool.
Additionally, if there are any large objects such as rocks or toys that are blocking the liner, they should be removed as well.
This will help to ensure that the liner is able to move freely and that it is not blocked by anything.
Once all of the debris has been removed, the pool should be ready for the next step in getting the liner back in track.
Filling the Pool with Water
When it comes to getting your inground pool liner back in track, the second step is to fill the pool with water.
Doing this is essential for the liner to be evenly distributed and for it to stay in place.
This can be done using a garden hose or a pool filling service.
When filling the pool with a garden hose, you will want to ensure that the water is evenly distributed throughout the pool.
Start by connecting the garden hose to the pools water intake valve.
Once connected, turn the water on and watch as the pool starts to fill up.
If you have an automatic water leveler, the pool will fill to the desired water level.
If you dont have an automatic water leveler, you will need to monitor the water level and adjust it accordingly.
Filling the pool with a pool filling service is also an option.
This service will provide all the necessary equipment and personnel to quickly and accurately fill your pool with the desired amount of water.
They will also be able to check the water level and make any adjustments needed.
Once the pool is filled with water, you will want to check the liner to ensure that it is evenly distributed.
You can do this by looking for any wrinkles or creases in the liner.
If the liner is not evenly distributed, you can use a pool vacuum to suck the liner back into place.
Using a Pool Vacuum to Secure the Liner in Place
Using a pool vacuum to secure the liner in place is the final step in getting your inground pool liner back in track.
Pool vacuums are designed to vacuum up debris and dirt from the pool floor, and are also equipped with powerful suction to suck the liner into place.
This is the most effective way to secure the liner, as it will ensure that it is evenly distributed in the pool and properly secured to the pool’s track system.
When using a pool vacuum, it is important to take your time and be careful.
Start by making sure that all of the debris and dirt from the pool floor has been removed and that the liner is evenly distributed in the pool.
Then, slowly move the vacuum around the pool, using its suction to suck the liner back into place.
Make sure to move the vacuum slowly and steadily, as a sudden or jerky movement can cause the liner to become unevenly distributed or rip.
Once the liner has been sucked into place, it should be properly secured to the pool’s track system.
This can be done with a metal track, or with a plastic track.
For a metal track, simply place the track over the liner and secure it with the screws provided.
For a plastic track, you will need to slide the track into place, making sure that the liner is properly wrapped around it.
By following these simple steps, you can ensure that your inground pool liner is properly secured and back in track.
This will allow you to enjoy your pool again, without worrying about the liner getting out of place.
Ensuring the Liner is Evenly Distributed
Once you have cleared the debris and dirt from the pool floor, the next step is to ensure that the liner is evenly distributed.
This is essential for keeping the liner in place, and it can be achieved in a few different ways.
The first is to use a garden hose to fill the pool with water until it is at the desired level.
The water will help to evenly distribute the liner and make sure it is not too tight or too loose.
Additionally, you can use a broom or a soft-bristled brush to spread out the liner and make sure it is lying flat against the pool walls.
This will help ensure that the liner is properly positioned and that it wont be pulled out of place.
Finally, you can use a pool vacuum to suck the liner back into place and secure it with the pools track system.
This will make sure that the liner stays in place and that it is not pulled out of position.
With these simple steps, you can easily get your inground pool liner back in track and enjoy your pool again!
Securing the Liner with the Track System
Once you have cleared any debris and dirt from the pool floor and filled the pool with water to evenly distribute the liner, the next step is to secure the liner in place with the pools track system.
This is important to ensure that the liner does not shift or move around, which can lead to an unevenly distributed liner or an uneven pool floor.
The track system is typically made up of a panel of interlocking grooves or a series of plastic tracks that run along the pool’s perimeter.
To secure the liner to the track system, you will need to use a pool liner locking strip.
These strips are designed to fit into the track system and provide additional support and stability for the liner.
When using a pool liner locking strip, it is important to make sure that you install it correctly.
First, you will need to make sure that the side of the strip with the rounded edges is facing upwards and the side with the sharp edges is facing downwards.
This is important to ensure that the strip fits into the track system securely and does not damage the liner when it is being secured.
Next, you will need to slide the strip into the track system and make sure that it fits snugly.
If the strip does not fit snugly, you may need to use a rubber mallet to gently tap it into place.
Once the strip is in place, you can then use a special locking clip to ensure that it stays in place.
By following these steps, you can easily secure your inground pool liner back in track and ensure that your pool is safe and secure.
With the help of a pool liner locking strip and a locking clip, you can easily get your pool liner back in track and enjoy your pool once again.
Final Thoughts
Getting an inground pool liner back in track can be a hassle, but it doesn’t have to be.
By following the steps outlined in this article, you can easily get your pool liner back into place and get back to enjoying your pool.
So the next time your pool liner gets out of track, don’t panic – just follow these steps and you’ll have your pool looking like new in no time!