Nothing is more annoying than having your lawn mower pull cord break on you when youre in the middle of mowing your lawn.
But dont despair with a few simple tools, you can have your mower running again in no time.
In this guide, well show you how to easily fix the pull cord spring on your lawn mower.
Well cover the tools you need, how to locate the broken spring, how to remove and replace it, and how to secure the spring in place.
Well also cover how to test the mower and replace other parts as needed.
If youre ready to get your lawn mower running again, lets get started!
Short Answer
The first step in fixing a lawn mower pull cord spring is to remove the spark plug wire to ensure the engine won’t start accidentally.
Then, remove the recoil housing and inspect the spring for signs of wear or damage.
If the spring looks worn or broken, it should be replaced.
To do this, disconnect the pull cord from the pulley, remove the spring, and then attach the new spring to the pulley.
Finally, reassemble the recoil housing and reattach the spark plug wire.
Tools Needed
If you’re looking to fix the pull cord spring on your lawn mower, you’ll need a few simple tools.
The most important tool you’ll need is a socket wrench.
This is used to remove the screws that secure the spring in place.
You’ll also need a pair of pliers to remove the broken spring from the mower, and a new spring that is the same size and type as the original.
Depending on the type of lawn mower you have, you may need a few other tools, such as a flat head screwdriver, a hammer, and a pair of scissors.
Make sure you have all the necessary tools before you begin the repair.
Locating the Broken Spring
When it comes to fixing the pull cord spring on a lawn mower, the first step is to locate the broken spring.
This can be a tricky task, as the spring is often tucked away in a hard-to-reach area.
Depending on the model of lawn mower, it may be located behind the engine, in the handle, or under the deck.
To get to the spring, you may need to remove some of the lawn mowers parts, such as the handle or engine cover.
Once you have located the broken spring, you will need to remove it in order to replace it with a new one.
To remove the spring, you will need to use a socket wrench to unscrew the screws that secure it in place.
Make sure to use the correct size of socket wrench to avoid damaging the screws or the lawn mowers parts.
Once the screws are removed, you can use pliers to pull the broken spring out of its place.
Make sure to store the screws somewhere safe as you will need them to re-secure the spring after you have replaced it.
Removing the Broken Spring
When it comes to fixing the pull cord spring on your lawn mower, the first step is to locate the broken spring and remove it.
This can be a tricky task, but with the right tools and some patience, you can do it! To start, you will need a socket wrench to remove the screws that secure the spring in place.
Once the screws are out, use a pair of pliers to remove the broken spring, then you will be ready to install a new one.
When replacing the spring, it is important that you use the same size and type of spring as the original.
This will ensure that the spring is secure and that it doesnt break again.
If you dont have the exact same size and type of spring, you can consult your local hardware store for a suitable replacement.
Once you have the new spring in place, use your socket wrench to re-secure the screws and youll be ready to get your lawn mower back in working condition.
Replacing the Broken Spring
Replacing the broken spring on your lawn mower can be a complicated task, but with the right tools and knowledge, it can be done with relative ease.
To begin, youll need to locate the broken spring.
Depending on the brand and model of your lawn mower, the spring may be located in a variety of places.
It is important to check your lawn mowers manual or do an online search to locate the broken spring.
Once you have located the broken spring, you will need to remove it.
To do this, you will need a socket wrench to remove the screws that secure it.
Once the screws are out, use a pair of pliers to remove the broken spring and replace it with a new one.
Make sure to use the same size and type of spring as the original.
After the spring is installed, use the socket wrench to re-secure the screws and return the lawn mower to working condition.
Securing the Spring
Once the broken spring has been located and removed, the next step is to secure the new spring in its place.
To do this, you will need a socket wrench.
This tool allows you to securely tighten and loosen screws.
Begin by selecting the appropriate size of wrench for the screws that secure the spring.
After the appropriate size has been selected, begin to remove the screws that secure the spring.
Once the screws are out, use pliers to remove the broken spring.
Be sure to use the same size and type of spring as the original.
This will ensure that your lawn mower is able to work properly.
After the new spring is in place, use the socket wrench to re-secure the screws.
This will keep the spring in its place and ensure that the lawn mower is able to work properly.
Make sure to tighten the screws fully to ensure the spring is held securely in place.
Once the screws are tightened, you can return the lawn mower to working condition and enjoy a freshly cut lawn.
Testing the Mower
Once the new pull cord spring is installed, it’s time to test the mower.
Start by reconnecting the spark plug and filling the tank with fuel.
If the mower has been sitting for a while, you may want to add a fuel stabilizer to help keep the fuel fresh.
Once the tank is full, pull the recoil handle a few times to help prime the engine.
Replace the air filter if necessary and then pull the cord again to start the engine.
Make sure to observe all safety precautions when working with gasoline and other flammable liquids.
If the lawn mower starts, it’s time to test the pull cord spring.
Start by engaging the clutch and pulling the cord to start the mower.
Make sure to follow the manufacturer’s instructions for starting the mower.
Once it’s running, pull the cord and release it a few times to make sure the spring is working properly.
If you feel resistance when pulling the cord, then the spring is working correctly.
If the cord is loose or there’s no resistance, then the spring needs to be adjusted.
Adjusting the spring is a simple process.
Start by disconnecting the spark plug and turning the mower off.
Insert a screwdriver into the hole in the side of the housing and turn the spring tensioner clockwise to increase tension.
Turn it counterclockwise to decrease tension.
Make sure to not over-tighten the spring as it can cause damage to the mower.
When the spring is adjusted properly, reconnect the spark plug and give it another test run.
Replacing Other Parts
Once the broken spring is located and removed, you may find that other parts of the lawn mower need to be replaced as well.
Depending on the age and condition of the mower, you may need to replace other parts, such as the spark plug, air filter, and carburetor.
The spark plug may need to be replaced if it is clogged or damaged, and the air filter should be replaced if it is clogged or has been used for a long time.
The carburetor may also need to be replaced if it has been damaged or needs to be adjusted.
All of these parts should be replaced with the same type and size as the original parts to ensure the lawn mower is running correctly.
Final Thoughts
Fixing the pull cord spring on a lawn mower can be a daunting task, but with the proper tools, knowledge, and patience, it can be done.
With the steps outlined in this guide, you can now confidently tackle this issue on your own.
Next time your lawn mower wont start, youll know the first place to look is the pull cord spring.
Go ahead and give it a try you can do it!