A hot tub can be a great way to relax and unwind after a long day – but if you don’t take care of it, your hot tub experience can quickly go from tranquil to terrible.
Cleaning your hot tub jets is essential for keeping your hot tub water clean and free of debris and bacteria.
In this article, we’ll show you the 3 easy steps you need to take to clean your hot tub jets, the tools you’ll need, and the benefits of keeping your hot tub jets clean.
So read on to learn all about how to keep your hot tub jets clean and sparkling!
Table of Contents
Short Answer
To clean your hot tub jets, start by draining the hot tub of all the water.
Then, use a soft cloth or brush to scrub the jets with a mixture of baking soda and water.
Rinse the jets with a garden hose and re-fill the hot tub with fresh, clean water.
Finally, turn on the jets to run the water through them and make sure all the residue is flushed out.
Benefits of Cleaning Hot Tub Jets
Cleaning the jets of a hot tub is an important part of maintenance, as they can become clogged with dirt and debris that can hinder the performance of the hot tub.
Regularly cleaning the jets can help ensure that your hot tub is functioning at its best.
There are several benefits to cleaning hot tub jets, including improved performance, increased water circulation, and reduced risk of bacteria and mold buildup.
When the jets of a hot tub are clean, they can provide better performance and improved water circulation.
This means that the water in the hot tub will be able to move more freely, resulting in improved circulation and a more consistent temperature.
Additionally, regularly cleaning the jets can help reduce the risk of bacteria and mold buildup, as the jets can become a breeding ground for these organisms if they are not cleaned properly.
Cleaning the jets of a hot tub is an important part of regular maintenance, and it can help ensure that your hot tub is functioning at its best.
Regularly cleaning the jets can help improve the performance and circulation of the hot tub, as well as reduce the risk of bacteria and mold buildup.
Following the steps outlined in this blog post will help you keep your hot tub jets clean and in top condition.
Steps to Clean Hot Tub Jets
When it comes to hot tub maintenance, cleaning the jets is an important step that should not be overlooked.
Hot tub jets can become clogged with dirt, debris, and other gunk over time, which can reduce the effectiveness of the jets and even cause damage if left untreated.
Luckily, cleaning hot tub jets is a relatively simple process that requires just a few steps.
The first step is to fill the hot tub with water.
Once the hot tub is full, add a jet cleaning solution to the water.
Jet cleaning solutions are specially formulated to effectively remove dirt and debris from the jets.
Be sure to read the manufacturers instructions carefully to ensure that the solution is used correctly.
The second step is to turn on the jets.
This will allow the cleaning solution to flow through the jets and begin to work its magic.
Let the jets run for around 10 minutes before turning them off.
The third step is to drain the hot tub.
Once the jets have been running for 10 minutes, turn them off and drain the hot tub.
Once the hot tub is empty, you can begin to clean the jets.
Use a scrub brush to manually scrub the jets clean.
Once the jets have been scrubbed, rinse the jets with clean water.
This will ensure that all of the cleaning solution has been removed from the jets.
Once the jets have been cleaned, you can refill the hot tub and enjoy.
Following these three steps will ensure that your hot tub jets are clean and in top condition.
Tools Needed to Clean the Jets
When it comes to cleaning the hot tub jets, you’ll need a few tools to get the job done.
First, you’ll need a jet cleaning solution.
This solution is specially designed to break down dirt and debris that can accumulate in the jets.
You’ll also need a garden hose and a scrub brush to help rinse away the cleaning solution after it has done its job.
Finally, you’ll need a bucket to help you drain the hot tub once you’ve finished cleaning the jets.
With these items ready to go, you can begin the process of cleaning your hot tub jets.
Filling the Hot Tub with Water
Filling the hot tub with water is an important first step in cleaning the jets.
To do this, you’ll need to turn off the power to the hot tub and open the drain valve.
Then, use a garden hose to fill the hot tub with fresh water to the desired level.
Once the hot tub is full, make sure the water is at the correct temperature.
This will ensure that the hot tub jets are not damaged by cold water when they are turned on.
Once the water is at the correct temperature, add a jet cleaning solution to the water.
This solution will help to break down the dirt and debris in the jets, making them easier to clean.
The amount of solution used will depend on the size of the hot tub and the amount of dirt and debris that needs to be removed.
Adding Jet Cleaning Solution to the Water
Adding jet cleaning solution to the water is an important step in cleaning hot tub jets.
Jet cleaning solutions are specifically designed to break down dirt, debris, and other contaminants that can build up in the jets over time.
To add the solution to the water, start by filling the hot tub with warm water.
Once the hot tub is full, add your jet cleaning solution according to the manufacturers instructions.
Be sure to add the solution evenly throughout the water, as this will ensure that all of the jets are thoroughly cleaned.
You may also want to consider adding a non-chlorine shock to the water, as this can help to further break down any dirt or debris in the jets.
Once the cleaning solution has been added, turn on the jets and allow them to run for 10 minutes.
This will allow the solution to flow through the jets and help to break down any dirt or debris.
After 10 minutes, turn off the jets and drain the hot tub.
Turning on the Jets
Turning on the jets is an important step in cleaning your hot tub.
To do this, simply adjust the settings on the control panel to turn the jets on.
Doing this will allow the cleaning solution to flow through the jets, loosening any dirt and debris that may be clogging them up.
Make sure the jets are on for at least 10 minutes so that the cleaning solution can do its job properly.
During this time, the water in your hot tub may become cloudy as the cleaning solution works its way through the system.
This is a normal part of the process and should not cause alarm.
Once the 10 minutes have passed, turn off the jets and proceed to the next step.
Draining the Hot Tub
Draining the hot tub is the last step in the process of cleaning the jets.
After the jets have been running for 10 minutes to allow the cleaning solution to flow through them, its time to turn off the jets and drain the hot tub.
This should be done as quickly and efficiently as possible to ensure that the cleaning solution does not sit in the hot tub for too long.
To begin draining the hot tub, locate the drain valve at the bottom of the hot tub and turn the valve clockwise until it is fully open.
Then, attach a garden hose to the drain valve and place the other end of the hose somewhere where the water can be safely and easily drained away.
After the hot tub is fully drained, be sure to turn off the drain valve and remove the garden hose.
If you have a filter system, you should also disconnect the drain hose from the filter system.
Finally, rinse the jets with clean water to remove any remaining dirt and debris.
With the hot tub drained and the jets rinsed, you can now enjoy a clean and relaxing hot tub experience.
Final Thoughts
Cleaning your hot tub jets is essential for ensuring your hot tub is in tip-top condition.
By following the 3 easy steps outlined above, you can quickly and easily give your hot tub jets a thorough clean.
All you need is some water, a jet cleaning solution, and a scrub brush.
Now that you know how to clean your hot tub jets, why not take a few minutes to do it today and get your hot tub ready for some well-deserved relaxation!